Quick answer: MAG box IPTV works through a portal, not an app. Find the MAC address on the sticker under your box and send it to us. Then open Settings, Servers, Portals, paste the portal URL into Portal 1 and restart the portal. Your channels load in about a minute. Test it first with our free IPTV trial.
| Setup time | About 5 minutes |
|---|---|
| Login type | Portal URL + MAC address |
| Best models | MAG 524, MAG 424, MAG 324, MAG 322 |
| 4K support | MAG 424 and MAG 524 |
| Connection | Ethernet recommended |

What you need before your MAG box IPTV setup
A MAG box is a small Linux set-top box made by Infomir. It’s built for one job: playing IPTV through a portal. That makes MAG box IPTV one of the simplest ways to watch live UK channels, because there are no apps to install and nothing to update every week. Before you start, gather these few things:
- A MAG box (MAG 322, 324, 424, 524 or newer) with its power adapter and remote.
- An HDMI cable and a TV with a free HDMI port.
- An Ethernet cable, or a Wi-Fi model such as the MAG 324w2 or MAG 524w3.
- Your box’s MAC address, printed on the sticker underneath.
- An active subscription or our free trial, plus the portal URL we send you.
Broadband matters more than the box itself. For HD channels you need around 15 Mbps per screen, and for 4K about 25 to 30 Mbps. Plug the MAG box into your router with a cable if you can, because wired connections stop the small drops that cause buffering during live football. If the router is in another room, a pair of powerline adapters works well and costs little.
Is a MAG box good for IPTV in 2026?
Yes, for most homes. A MAG box boots straight into your channel list, has a simple remote and rarely needs attention. That’s why MAG box IPTV is popular with older relatives, pubs, holiday lets and anyone who wants TV that just works. There are no adverts on the home screen and no app store to confuse things.
The trade-off is flexibility. A Firestick or Android box runs thousands of apps, including Netflix and BBC iPlayer, while a classic Linux MAG box mostly runs IPTV portals. If you want IPTV plus streaming apps on one device, read our Android IPTV box guide instead. If you just want live TV, catch-up and films, MAG box IPTV is hard to beat.
Newer models have closed the gap. The MAG 424 and MAG 524 offer 4K HDR and much faster processors than older boxes, and Infomir also sells Android-based models. Older MAG 250 and MAG 254 units still work, but their slow chips and HD limits make them feel dated in 2026. If yours is one of these, an upgrade is worth considering.
Best MAG box models for IPTV
| Model | Max quality | Wi-Fi | Best for |
|---|---|---|---|
| MAG 524 | 4K HDR | Built in on w3 models | Best all-round choice |
| MAG 424 | 4K HDR | Built in on w3 models | 4K on a budget |
| MAG 324 | Full HD (H.265) | Built in on w2 models | Bedrooms and second TVs |
| MAG 322 | Full HD (H.265) | Ethernet only on most units | Budget HD viewing |
| MAG 250 / 254 | HD | No | Older boxes, upgrade if you can |
Our pick is the MAG 524. It’s quick, supports 4K and handles busy Saturday afternoons without stutter. The MAG 324 is a solid choice for a bedroom TV where Full HD is enough. Whichever model you choose, MAG box IPTV setup works the same way, so the steps below apply to every box in the table.
How to set up MAG box IPTV: quick steps
- Find the MAC address on the sticker under your MAG box.
- Send the MAC address to our team and receive your portal URL.
- Connect the box to your TV and router, then power it on.
- Open Settings, then System settings, Servers and Portals.
- Enter a name and paste the portal URL into Portal 1.
- Save, restart the portal and wait for the channels to load.
That’s the whole process. The detailed steps below explain each screen, because MAG menus vary a little between firmware versions. If you get stuck at any point, our support team can walk you through MAG box IPTV setup on a quick chat, usually in a few minutes.
Step 1: Find your MAG box MAC address
Every MAG box has a unique MAC address: 12 characters split into pairs, such as 00:1A:79:XX:XX:XX. Infomir boxes almost always start with 00:1A:79. You’ll find it printed on the sticker under the box, next to the serial number, and usually on the side of the retail packaging too.
No sticker? Turn the box on and open Settings, then Device info or Status, where the MAC address is listed. Write it down carefully. MAC addresses only use the numbers 0 to 9 and the letters A to F, so there’s never a letter O. Send it to us by email or WhatsApp and we’ll link it to your MAG box IPTV account.
Step 2: Connect the box and update the software
Connect the HDMI cable from the MAG box to your TV, plug the Ethernet cable into your router, then connect the power. The box boots in under a minute and shows the Infomir start screen or the inner portal. If you see a blank screen, choose the correct HDMI input with your TV remote.
Next, update the firmware. Go to Settings, then Software update, and choose Update via HTTP. The box downloads the latest version and restarts itself, so don’t switch it off while this happens. Up-to-date software fixes bugs, improves video playback and makes MAG box IPTV more stable with modern portals.
Wi-Fi models: open Settings, then Network, then Wireless (Wi-Fi). Choose your network, type the password with the on-screen keyboard and confirm. Then run the software update as described above.
Step 3: Add the portal URL
This is the key step for MAG box IPTV. Press Menu or Setup on the remote, open Settings, then System settings, then Servers, then Portals. On newer menus the path is simply Settings, Servers, Portals. You’ll see fields for Portal 1 name, Portal 1 URL, Portal 2 name and Portal 2 URL.
Select Portal 1 name and type something simple, such as IPTV UK Shop. Then select Portal 1 URL and type the full portal address we sent you, exactly as written, including http:// and any slash at the end. One wrong character stops the portal loading, so double-check it before saving with the OK button.
Leave Portal 2 empty unless we give you a backup address. Some boxes also show a setting called Use portal from DHCP; switch it off so your MAG box IPTV portal loads every time the box starts.
Step 4: Restart the portal and load channels
Press Exit to go back, then choose Restart portal or Reboot from the settings menu. The box reloads, connects to the server and checks your MAC address. Within a minute you’ll see the portal home screen with tiles for TV, Films, Series and Settings.
Open TV and choose a group such as UK Entertainment, UK Sport or UK Movies. Channels start in one to two seconds on a wired connection. If you see “STB blocked” or “Authorisation failed”, the MAC address hasn’t been linked yet. Contact us and we’ll activate it, usually within minutes. Your MAG box IPTV setup is then complete.
TV guide (EPG) and favourites on a MAG box
The portal includes a full TV guide. While watching a channel, press the EPG or Guide button on the remote, or open TV and press the right arrow, to see what’s on now and next. Most portals also show a seven-day grid for each channel, which is perfect for planning the weekend’s football.
To build a favourites list, highlight a channel and press the Fav button, or open the channel options with the menu key and choose Add to favourites. Then open the Favourites group to see only the channels you watch. It makes MAG box IPTV much quicker for the whole family, especially for anyone who doesn’t like scrolling through long lists.
If the guide shows the wrong times, set the time zone to Europe/London under Settings, then Time settings (Network settings on some older firmware), and restart the portal.
Best MAG box IPTV settings
- Video output: Settings, Video, then 1080p-50 for HD TVs or 2160p-50 for 4K TVs, matching UK broadcasts.
- Auto frame rate: switch it on so films at 24fps play smoothly without judder.
- Aspect ratio: choose Auto or 16:9 to avoid stretched pictures.
- Audio: set HDMI output to PCM if your soundbar is silent, or passthrough for Dolby sound.
- Time zone: Europe/London, so the TV guide matches UK times.
- Buffer: if the portal has a buffer option, 2 to 3 seconds smooths small connection drops.
After changing video settings, the screen may go black for a few seconds while the TV adjusts. Accept the new mode when the box asks. These settings get the best picture from MAG box IPTV without adding delay to live sport.

4K MAG box IPTV
For 4K you need a 4K model such as the MAG 424 or MAG 524, a 4K TV and around 25 to 30 Mbps of steady broadband. Set the video output to 2160p-50 and use a high-speed HDMI cable, because older cables can cause flickering or a blank screen. The MAG 322 and 324 are Full HD boxes, so they play 4K channels in HD.
Our 4K section includes sport, films and documentaries in UHD where available. Read our 4K IPTV UK guide for the full list and extra tips. On a wired connection, 4K MAG box IPTV looks sharp and steady, even during fast camera pans at Premier League matches.
Live sport on a MAG box
MAG boxes are excellent for sport because they start channels fast and rarely crash. Add your sport channels to Favourites before kick-off, and use the TV guide to find the match a few minutes early. If a channel stutters, try the HD or backup version of the same channel, which usually streams from a different server.
Saturday afternoons and big midweek nights put the most pressure on home broadband. Pause other heavy downloads during the match and keep the box on Ethernet. Our Premier League IPTV page explains which channels show each game, so you can enjoy MAG box IPTV without hunting for the right stream.

Movies, series and catch-up on a MAG box
Open the Films or Series tiles in the portal to browse the on-demand library. You can search by title with the on-screen keyboard, filter by genre or year, and resume where you stopped. Series are grouped by season and episode, so binge-watching is easy from the sofa.
Many channels also offer catch-up. A clock or archive icon means you can go back and watch programmes from the past few days, which is handy when a match kicks off before you get home. Catch-up, films and series all run through the same portal, so MAG box IPTV covers live TV and on-demand in one place.

MAG box IPTV not working? Fixes
- Portal not loading: check the portal URL for typos, including http:// and slashes, then restart the portal.
- “STB blocked” or “Authorisation failed”: your MAC address isn’t active yet. Send it to support so we can link it.
- No channels after loading: restart the box by unplugging the power for 30 seconds.
- Buffering: switch to Ethernet, restart your router and pause other downloads.
- Black screen with sound: change the video output mode to match your TV, such as 1080p-50.
- No sound: set the HDMI audio output to PCM under Settings, then Audio.
- Wrong TV guide times: set the time zone to Europe/London and restart the portal.
- Box stuck on the logo: run a firmware update, or reset to factory settings as a last resort.
Most MAG box IPTV problems come from a typo in the portal URL, an inactive MAC address or a weak connection. If none of these fixes help, message our support team with a photo of the error and we’ll sort it quickly.
MAG box vs Firestick for IPTV
| Feature | MAG box | Firestick |
|---|---|---|
| Setup | Portal URL + MAC address | App + username and password |
| Apps | IPTV portals only (Linux models) | Thousands of apps |
| Ethernet | Built in | Adapter needed |
| Remote | Simple IR remote | Alexa voice remote |
| Stability | Very high | High |
| Best for | Simple, reliable live TV | IPTV plus streaming apps |
Choose MAG box IPTV if you want a dedicated box that anyone can use and that rarely needs attention. Choose a Firestick if you also want Netflix, Disney+ and other apps on the same device; our Firestick IPTV guide covers that setup step by step. Many customers use both: a MAG box in the lounge and a Firestick in the bedroom.
MAG box IPTV FAQs
What is MAG box IPTV?
It’s IPTV delivered through a portal on an Infomir MAG set-top box. You enter a portal URL once, and the box loads live channels, films and series from then on.
Do I need an app for MAG box IPTV?
No. MAG boxes have a built-in portal browser, so you only enter the portal URL in settings. There’s nothing to download or update by hand.
Where is the MAC address on a MAG box?
On the sticker under the box, and in Settings under Device info or Status. It usually starts with 00:1A:79.
Can I use one subscription on two MAG boxes?
Each portal login is tied to one MAC address. For two or more boxes, ask us about a multi-screen plan and we’ll set up each box.
Can I move my MAG box IPTV to a new box?
Yes. Send us the new MAC address and we’ll move your subscription across, usually within minutes.
Which MAG box is best for IPTV?
The MAG 524 is the best for 4K and speed. The MAG 324 is great value for Full HD on a bedroom TV.
Does MAG box IPTV work on Wi-Fi?
Yes, on Wi-Fi models, but Ethernet is more stable for live sport and 4K. Use powerline adapters if your router is far away.
Why does my MAG box say “STB blocked”?
The MAC address isn’t activated yet or was typed incorrectly. Contact support and we’ll check and activate it.
Can a MAG box play M3U playlists?
Some firmware can add M3U links in the inner portal’s IPTV section, but the portal gives a much better experience with a full TV guide.
Does a MAG box support catch-up?
Yes. Channels with the archive icon let you watch programmes from the past few days, right from the TV guide.
Is a MAG box better than a Smart TV app?
It’s usually faster and more stable, because it’s built only for IPTV and doesn’t slow down with updates over time.
Can I watch MAG box IPTV abroad?
Yes. The portal works anywhere with a good internet connection, so you can take the box on holiday and plug it into the hotel TV.
How do I reset a MAG box?
Open Settings and choose Reset settings (Defaults on some older firmware). Afterwards, enter your portal URL again and restart the portal.
Do I need a TV licence for MAG box IPTV?
If you watch or record live TV in the UK, you need a TV licence. Check TV Licensing for the full rules.
Why is my MAG box IPTV slow to change channels?
Usually a weak connection or old firmware. Switch to Ethernet, update the software and restart the box.
Will MAG box IPTV work with an old TV?
Yes, as long as the TV has an HDMI port. Some older MAG models also offer AV output for very old TVs.
How long does MAG box IPTV setup take?
About five minutes once your MAC address is activated. Most of that time is the firmware update.
Can I try MAG box IPTV before paying?
Yes. Start our free trial, send your MAC address and test every channel group on your own box before you choose a plan.
Can I leave my MAG box on all the time?
Yes. Use standby when you’re not watching. A full restart once a week keeps the box running smoothly.
What internet speed does MAG box IPTV need?
Around 15 Mbps for HD and 25 to 30 Mbps for 4K, ideally over a wired Ethernet connection.
Related guides: Formuler MyTVOnline, Android IPTV box, Firestick, Nvidia Shield, UK channels list and all IPTV setup guides.